Soil Stabilization & Settlement Control · Water Cut-Off Resin
AP Fill 720 Polyurethane Water Cut-Off Resin
A single-component resin that expands up to 49 times the moment it meets water, for choking off high-flow leaks and filling the voids they leave behind.
NSF/ANSI/CAN 61 & 372 Certified · Certified for contact with drinking water. The listing carries use restrictions.
Water cut-off
Void filling
Up to 49x expansion
Seawall & bulkhead washout
On this page:
What it is
A high-expansion resin for stopping water and filling the space it made
AP Fill 720 is a single-component, water-activated, hydrophobic, closed-cell polyurethane injection resin used to cut off high-flow water leaks, fill voids behind concrete structures, and stabilize soil that water has washed out. It reacts on contact with water and expands up to 49 times its liquid volume, which is what lets a small injected quantity fill a large void and choke the flow at the same time.
Cured, it is semi-rigid, closed cell, and water impermeable. Set time is adjustable from about 22 seconds to about 95 seconds with Alchatek Gen Cat or Gen Cat Fast.
Where it is used
What AP Fill 720 is used for
AP Fill 720 sits in the Soil Stabilization & Settlement Control solution family, and it is the resin Alchatek points at seawall and waterfront work where soil is washing out behind the wall.
Cutting off high-flow, high-pressure leaks
Cutting off underground water flows
Filling voids behind concrete structures
Seawall and bulkhead soil washout
Stabilizing and sealing large cracks and gravel layers
Sewer leak cut-off and sewer stabilization
Probe grouting for below-grade pipes
Mine, tunnel, pipe jacking and TBM injection
Choosing between this and a permeation grout, meaning a thinner resin that soaks into the spaces between soil grains and binds them together? Use AP Fill 720 when there is an open void and water moving through it. Use AP Soil 600 or AP Fill 700 when the ground itself is loose and needs binding in place rather than filling.
How it works
How AP Fill 720 chokes off moving water
AP Fill 720 is injected with accelerator into the void or the leak, reacts with the water already there, expands up to 49 times its liquid volume, and cures into a closed-cell foam that fills the space and blocks the flow. The water is not an obstacle to the cure. It is the trigger for it, which is why this resin works in the wet conditions that defeat products needing a dry substrate.
The crew's control is dosage and accelerator choice. More accelerator reacts faster, and warmer material reacts faster still, so a fast-moving leak gets Gen Cat Fast at a high dose to cure before the resin washes away, while a slower seep gets a longer window to travel and fill. Cured, the foam is water impermeable, so it does not reabsorb water when the flow returns.
Technical specifications
Published properties
Uncured resin
Property | Value | Method |
|---|---|---|
Appearance | Brown liquid | TDS |
Viscosity at 77°F (25°C) | 215 cP (215 mPa·s) | ASTM D-4878 |
Liquid density | 69.9 lb/ft³ (1.12 kg/dm³) | ASTM D-3505; liquid resin, not cured foam |
Cured properties
Property | Value | Method |
|---|---|---|
Compressive strength, with fine sand | 1,803 psi, or 259,632 psf (12,400 kPa) | ASTM C-39 |
Tensile strength | 43 psi, or 6,192 psf (296 kPa) | ASTM D-1623 |
Tensile elongation | 3.80% | ASTM D-1623 |
Shrinkage | Negligible | ASTM D-1042 / D-756 |
Set time and expansion with Alchatek Gen Cat
Gen Cat dosage | At 41°F (5°C) | At 59°F (15°C) | At 77°F (25°C) |
|---|---|---|---|
5% | 18 to 95 sec, 40x | 18 to 78 sec, 40x | 14 to 55 sec, 49x |
8% | 15 to 60 sec, 42x | 14 to 51 sec, 42x | 10 to 43 sec, 49x |
10% | 15 to 48 sec, 42x | 11 to 41 sec, 42x | 8 to 35 sec, 49x |
Set time and expansion with Alchatek Gen Cat Fast
Gen Cat Fast dosage | At 41°F (5°C) | At 59°F (15°C) | At 77°F (25°C) |
|---|---|---|---|
5% | 19 to 75 sec, 42x | 14 to 57 sec, 45x | 9 to 43 sec, 49x |
8% | 15 to 40 sec, 42x | 10 to 35 sec, 45x | 7 to 30 sec, 49x |
10% | 10 to 35 sec, 42x | 8 to 28 sec, 45x | 5 to 22 sec, 49x |
Handling & certification
Property | Value | Method / Note |
|---|---|---|
Composition | Single component plus accelerator; water activated, hydrophobic, closed cell, semi-rigid, solvent free and phthalate free | TDS / product page |
Storage | 50–80°F (10–26°C) | TDS |
Shelf life | 24 months, unopened, within storage range | TDS |
Packaging | 5-gallon pail, 50-gallon drum, and 250-gallon tote | Product page |
Certification | NSF/ANSI/CAN 61 and 372. Certified for contact with drinking water. The listing carries use restrictions on wetted surface area and minimum tank volume. See the certificate. | TDS and certified product listing |
Each set time cell gives the start of the reaction, the end of the reaction, and the expansion at that dosage and temperature. 41, 59 and 77 degrees F are the temperatures the data sheet tested at, not an application temperature range; no application range is published for this resin. Compressive strength describes sand permeated with the resin, not the cured foam alone, and the density row is the liquid resin, not the cured foam. Source: AP Fill 720 Technical Data Sheet, except where the Note column says otherwise. Properties vary with site conditions; confirm against the current data sheet before specifying.
Downloads
Data sheets, procedures, and certificates
Technical Data Sheet (TDS)
Published properties · PDF
Safety Data Sheet (SDS)
Handling and safety · PDF
NSF/ANSI/CAN 61 & 372 Certificate
Certified product listing · PDF
Procedures, Point Grouting Pipe Leaks
Field procedure · PDF
Soil Stabilization Brochure
Request page, not a direct download
Assembling a submittal package or comparing products? Every TDS, SDS, spec, and certificate lives in the central Downloads library.
Compatible equipment & accessories
What you need to inject AP Fill 720
Single-component airless injection pump, recommended for AP Fill 720. View pumps
Alchatek Gen Cat, the standard accelerator. Dosage from 5 to 10 percent sets the reaction. View accelerators
Alchatek Gen Cat Fast, for conditions that need the reaction to finish sooner. View accelerators
Alchatek Pump Flush, reusable, biodegradable pump flush. This resin can be set to finish reacting in about 22 seconds, so stage the flush before injecting. View flush
Related articles & guides
Learn the method behind the product
Filling Voids with Polyurethane Foam
Method explainer
Polyurethane Foam for Seawall Repair - Technical Details
Seawall application
Waterfront Staircase Stabilization
Project evidence
Frequently Asked Questions
Cutting off high-flow water and filling the void it leaves behind. Its published uses are filling voids behind concrete structures, cutting off high-flow leaks, cutting off underground water flows, stabilizing soil, and seawall repair.
Up to 49 times its liquid volume at 77 degrees F, and 40 to 45 times at 41 to 59 degrees F, per the published set time tables. Expansion rises with material temperature, so warmer resin fills more volume than colder resin at the same accelerator dosage.
As fast as 22 seconds end to end, and it is adjustable. The fastest published combination is Gen Cat Fast at 10 percent and 77 degrees F, which starts reacting in 5 seconds and finishes at 22. The slowest published combination is Gen Cat at 5 percent and 41 degrees F, which starts at 18 seconds and finishes at 95.
Speed, at the same dosage and temperature. At 10 percent and 59 degrees F, Gen Cat starts in 11 seconds and finishes at 41; Gen Cat Fast starts in 8 seconds and finishes at 28. Both are dosed from 5 to 10 percent and both reach the same expansion range. Choose by how fast the water is moving, then fine-tune with dosage.
Expansion and viscosity, which point them at two different jobs. AP Fill 720 is thicker at 215 cP and expands up to 49 times, so it fills volume and chokes off flow. AP Fill 700 is thinner at 120 cP and publishes no expansion figure, because its job is to travel between sand grains and bind them. Use 720 when there is a void and moving water; use 700 when the soil itself needs permeating.
Published compressive strength is 1,803 psi, or 259,632 psf, tested with fine sand by ASTM C-39. Tensile strength is 43 psi, or 6,192 psf, with 3.80 percent tensile elongation by ASTM D-1623, and shrinkage is negligible. The compressive figure describes resin-filled sand, not the foam on its own, so read it in that context.
Hydrophobic. It reacts with water to cure and then repels it, curing closed cell and water impermeable, so the cured foam does not reabsorb water. It is also solvent free and phthalate free.
Yes. Seawall repair is a published use, and this is the resin Alchatek points at soil washing out behind seawalls and bulkheads. It fills the void and cuts off the water moving through it. Pair it with a permeation grout when the surrounding soil also needs binding, and bring Technical Services in on the sequence.
AP Fill 720 is certified to NSF/ANSI/CAN 61, which covers contact with drinking water, and to NSF/ANSI/CAN 372, which covers lead content. The listing carries use restrictions on wetted surface area and minimum tank volume, so read the certificate and confirm the certification is current before specifying.
A single-component airless injection pump is recommended, with Alchatek Gen Cat or Gen Cat Fast as the accelerator and Alchatek Pump Flush for shutdown. Because this resin can be set to finish reacting in about 22 seconds, stage the flush before injecting rather than after.
5-gallon pails, 50-gallon drums, and 250-gallon totes.
Unopened containers have a 24 month shelf life when stored between 50 and 80 degrees F.
Proof & Verification
APFILL720-PB-01
Gravel Wall Stabilization
Water moving faster than you can fill the void behind it? Talk the flow, the temperature and the set time through before the pump goes out.
For documentation, see the data sheets above or reach Technical Services. To purchase, find an authorized distributor or a qualified contractor.