Leak Sealing & Water Control · Injection Resin
Spetec GT350 Polyurethane Injection Resin
A single-component, MDI-based flexible resin for sealing active water leaks in cracks and joints, including structures that move or settle.
Hydrophilic
Crack & joint injection
Curtain grouting
Manhole rehabilitation
On this page:
What it is
A flexible, water-reactive resin for sealing active leaks
Spetec GT350 is an MDI-based, hydrophilic, single-component flexible polyurethane injection resin used to shut off active water leaks in cracks and joints. When it meets water, the resin reacts and expands, then cures into a flexible mass that fills the crack or joint and seals the leak. Because the cured material stays flexible, it holds up in cracks and joints that move or settle.
GT350 injects single component, or two component in combination with water, and requires no catalyst. Soaked into oakum, an oil-free compressible fibrous packing, it also seals wider joints, including the joints between secant piles.
Where it is used
What GT350 is used for
GT350 is part of the Spetec Leak Seal Systems line and sits in the Leak Sealing & Water Control solution family.
Crack and joint sealing in concrete, brickwork, and sewers
Curtain grouting behind tunnel, concrete, and sewer walls
Joint sealing with oakum soaked in GT350
Manhole infiltration control
Foundation water cut-off: diaphragm walls, sheet piles, and secant piles
Sealing failing membranes and liners in tunnels and buildings
How it works
How GT350 seals a leak that is already flowing
GT350 is injected into a wet crack or joint, where it reacts with the water present, expands, and cures into a flexible seal. Viscosity rises immediately, so the resin stays where it is placed rather than running off. Because it is hydrophilic, water is part of how the resin works: a leak running at the time of injection is the condition it is built for, not something to dry out first.
For wider or irregular joints, oakum is soaked in GT350 and packed into the joint, where the resin reacts with water and expands to seal it. Per the TDS, the cured resin is harmless to the environment and resistant to biological attack.
Technical specifications
Published properties
Resin (uncured)
Property | Value | Method |
|---|---|---|
Appearance | Clear amber liquid | - |
Viscosity at 73°F (23°C) | 280 cP (280 mPa·s) | EN ISO 3219 |
Density at 73°F (23°C) | 72.4 lb/ft³ (1.16 kg/dm³) | EN ISO 2811-1 |
Alchatek Gen Cat, optional accelerator, not required for GT350
Property | Value | Method |
|---|---|---|
Appearance | Yellow-orange liquid | - |
Viscosity at 77°F (25°C) | 75 cP (75 mPa·s) | ASTM D4878 |
Density at 77°F (25°C) | 65.5 lb/ft³ (1.05 kg/dm³) | EN ISO 2811-1 |
Flash point | 313°F (156°C) | - |
Handling & certification
Property | Value | Method / Note |
|---|---|---|
Composition | Single component, hydrophilic, MDI-based; no catalyst required | TDS / product page |
Application temperature | 41–95°F (5–35°C) | TDS |
Storage | 50–80°F (10–26°C) | TDS |
Shelf life | 24 months, unopened, within storage range | TDS |
Source: Spetec GT350 Technical Data Sheet, Rev. 1/21/2026. Properties vary with site conditions; confirm against the current data sheet before specifying.
Downloads
Data sheets and application guides
Technical Data Sheet (TDS)
Published properties · PDF
Safety Data Sheet (SDS)
Handling & safety · PDF
Application Guide, Cracks & Joints
Standard injection procedure · PDF
Application Guide, Manhole Infiltration
Manhole infiltration control · PDF
Assembling a submittal package or comparing products? Every TDS, SDS, spec, and certificate lives in the central Downloads library.
Compatible equipment & accessories
What you need to inject GT350
Single-component airless injection pump, recommended for GT350. View pumps
High-pressure crack-injection valves and packers, for setting and injecting cracks and joints. View accessories
Alchatek Pump Flush and Soak 130, reusable biodegradable pump flush for shutdown, and the solvent that cleans cured polyurethane off equipment. View flush View solvent
Oakum, oil-free compressible fibrous packing, forced into a joint or opening to provide a backing, seal, or carrier for the resin. It has to be oil free, because oiled fiber will not absorb the resin. View
Related articles & guides
Learn the method behind the product
Sealing Leaks - Crack Injection & Curtain Wall Grouting
Method explainer
Hydrophobic Polyurethanes vs Hydrophilic Polyurethanes
Chemistry comparison
Sealing Manholes with Spetec GT350
Field walk-through
Frequently Asked Questions
Yes. GT350 is a hydrophilic, water-reactive resin made for cracks and joints where water is present. It reacts with the water and expands to fill the crack or joint and seal the leak.
No. GT350 is a single-component resin and requires no catalyst. It can be injected single component, or two component in combination with water.
Concrete, brickwork, and sewers; foundation elements such as diaphragm walls, sheet piles, and secant piles; tunnel-segment cracks and joints; curtain grouting behind walls; and failing membranes or liners in tunnels and buildings.
Yes. Cured GT350 is highly flexible, which suits cracks and joints that move or where settlement may occur.
A single-component airless injection pump is recommended, along with crack-injection packers and valves, and a pump flush or cleaner for shutdown.
GT350 is an MDI-based hydrophilic resin for wet, dynamic cracks and joints. GT500 is a closed-cell hydrophilic resin with low viscosity and high elongation, for hairline cracks and oakum gaskets. F400 is a flexible hydrophobic grout for dynamic cracks and joints.
Yes. Oakum is an oil-free compressible fibrous packing that is soaked in GT350 and packed into the joint. It has to be oil free, because oiled fiber will not absorb the resin. The soaked oakum holds the resin in place while it reacts with water and expands, which is what lets wider and irregular joints be sealed, including the joints between secant piles.
No. They are the same product. Alchatek dropped PUR from the name, so older data sheets, labels, and purchase orders may still read Spetec PUR GT350. The resin itself did not change.
Proof & Verification
GT350-PB-01
Minimally Invasive Tunnel Leak Repair
Specifying GT350, or weighing it against another leak-seal resin? Talk the condition through before you commit to a method.
For documentation, see the data sheets above or reach Technical Services. To purchase, find an authorized distributor or a qualified contractor.