For Property Owners
Sinking, cracking, or water getting in? Understand what’s really going on — and what to do next.
Use condition-first guidance and project support to understand what a visible symptom may mean, when it deserves attention, and what the next step should be.
Clear next steps
Condition-first guidance
Project-specific support when needed
What you are seeing
Visible symptoms usually point to something changing below, behind, or within the structure
A settled slab, recurring leak, hollow area, waterfront sink zone, or sign of support loss often begins as a visible nuisance and becomes a more serious cost, safety, or operations problem when the underlying condition keeps changing. The symptom matters, but the next step depends on what is actually driving it.
How urgent is it?
How urgent does this look?
Use three simple bands to gauge what a visible symptom may need next. Most conditions fall into watch closely, needs attention soon, or request project assistance now — and the right band depends on whether the symptom is stable, slowly changing, or active.
Watch closely
Minor, stable, and not spreading. Note it, photograph it, and re-check on a set schedule so you would notice if it starts to change.
Needs attention soon
Visible, slowly changing, or tied to occasional water. Narrow the condition now so the right repair direction is clear before it worsens.
Request project assistance now
Active, recurring, tied to water, affecting operations, or creating trip or access risk. Bring in direct support before a repair direction is chosen.
Before you assume a fix
Start by narrowing the condition before assuming the repair
Different symptoms can look similar even when they come from different causes. Settlement may reflect a shallow support-loss issue or a broader soil condition. Water intrusion may reflect a pressure condition, an entry route, or both. A depression or hollow area may indicate hidden washout or cavity formation. This page helps owners move into the right condition pages before a repair direction is assumed too early.
Choosing a next step
The best next step is the one that reduces uncertainty
Some conditions need only a clearer understanding of the likely mechanism and the corresponding repair route. Others need direct technical support. Strong routing helps owners avoid overreacting to minor symptoms and underreacting to serious ones.
Symptom-first routing
Start with the most relevant visible symptom
Pick what you can actually see. Each card opens the condition page that explains what may be driving the symptom and the repair direction that usually follows.
Settled or uneven slabs
Floors, walkways, or pavement that have dropped, tilted, or cracked.
Recurring leaks or water entry
Water returning through walls, joints, or below-grade areas.
Hollow or sunken areas
Hollow-sounding concrete or depressions that suggest empty space below.
Waterfront sink zones
Soil loss, sinkholes, or settlement behind a seawall or bulkhead.
Signs of support loss
Movement, cracking, or settlement where the ground beneath may be weakening.
The cost of waiting
What delay often costs
Waiting rarely makes a support or water issue cheaper. When the underlying cause keeps changing, the cost usually grows in more than one place at once.
Growing repair scope
As the affected area spreads
More disruption
To operations and access
Recurring leaks or movement
That keep coming back
Rising cost
The longer the condition is left active
Lower confidence
In the asset and its value
When to bring in support
Use direct support when the issue is no longer easy to read
When the symptom is growing, returning, affecting operations, tied to water, creating trip or access risk, or difficult to explain with confidence, project assistance becomes the better next step. Strong support earlier often reduces cost and disruption later because the issue gets narrowed before the wrong repair direction is chosen.
Where to go next
Project Fit Snapshot
Match your situation to the next step that fits it best.
Visible symptom with unclear cause
Likely condition with a probable repair route
Recurring, disruptive, or higher-consequence issue
You want explanation before spending money
Not sure how serious it is? Get a direct read on the condition.
When the symptom is active, recurring, tied to water, or hard to explain on your own, a short conversation can help narrow it before the wrong repair direction is chosen.
Frequently Asked Questions
This page helps owners understand visible conditions such as settled slabs, recurring leaks, hollow areas, support loss, erosion, washout, and related symptoms that may point to a larger support or water-performance issue.
Treat the issue as serious enough to narrow now when the symptom is recurring, growing, tied to water, affecting operations, creating safety or access concerns, or difficult to explain confidently.
Waiting is rarely free. Support-loss and water-driven conditions usually become more disruptive, more expensive, and harder to explain when the underlying cause keeps changing.
Start with the most relevant visible condition right away. If the issue is active, recurring, disruptive, or difficult to read confidently, request project assistance instead of waiting for the condition to clarify itself.
Yes. Owners should be able to route into pages that explain settled slabs, voids beneath concrete, and the solution pages that typically follow those conditions.
Yes. Owners should be able to route into leak-sealing and water-control content when recurring water entry, seepage, or below-grade leakage is part of the problem.
No. The platform should help narrow the condition and guide owners into the correct next step even when they do not yet know the technical explanation.
Request project assistance when the issue is active, recurring, tied to water, creating support loss, disrupting operations, or difficult to narrow on your own.
Proof & Verification
Named Project
Void Remediation Under Slab Foundation
A hidden plumbing leak eroded soil under a slab into voids nearly swallowing 4-foot probes until AP Lift 430 bonded soil and concrete for good.
Performance Data Point
All voids filled in one day.
Documentation Reference
Move from a visible symptom to a clear next step — with condition-first guidance now and project-specific support when the issue is no longer easy to read.