Filling Voids with Polyurethane Foam
Filling voids is one of the most common applications for polyurethane concrete repair foam. Geotech contractors use specialized foam to fill voids in the soil under slabs, behind retaining walls, and around municipal infrastructure. Here’s how it works in each setting.
Filling Voids Under Concrete Slabs
When soil under a slab washes out or settles, the concrete is left unsupported and can crack, sink, or break under load. Warning signs include:
Cracked, sinking, or uneven concrete.
Gaps between the slab and nearby walls or curbs.
Water pooling on or around the slab.
To repair the void, small holes are drilled through the slab and polyurethane foam is injected into the soil below. The foam expands to fill the void, cures quickly, and adds very little weight to the soil.
Filling Voids Surrounding a Structure
Alchatek’s AP Fill 700 and AP Fill 720 are one-component polyurethanes used for filling voids in supporting soil surrounding a structure. Situations in which these materials might be used for void fill include soil adjacent to retaining walls, basement walls, seawalls, and infrastructure boxes.
These voids usually form when water moving through cracks or joints carries soil away. The material is injected into the void, where it expands to fill the open space and bonds with the surrounding soil.
Filling Voids in a Municipal Leak Seal Context
Leaks and voids in concrete infrastructure often go together, since water entering a structure carries soil with it.
Causes of leaks and voids:
Imperfect construction.
Weather and wear.
Unstable soil.
How injection grout helps:
Water activation. The grout reacts with water, so active leaks don’t need to be dried first.
Pressure injection. A pump forces grout deep into cracks, joints, and surrounding voids.
Flexible, watertight seal. The cured grout stays flexible as the structure moves.
Contact Alchatek at 404-618-0438 to discuss the right material for your void fill project.