Legal
Product Limited Warranty
Alchatek publishes two limited warranties: one for chemical and material products, one for equipment and rigs. Both cover only what Alchatek manufactures. Neither is a warranty of installed work: installation is performed by trained contractors, and field performance depends on site conditions and application.
This page reproduces the warranties printed on Alchatek data sheets. For materials, the Technical Data Sheet current at your date of shipment governs.
Start here
Which warranty applies to what you bought
The two warranties work differently. Coverage, how the one-year period is measured, and what you need to file a claim are not the same. Use the one that matches what you purchased.
Chemical and material products
If you bought resin, foam, coating, or another material. Resins, catalysts, accelerators, coatings, adhesives, and other application-sensitive materials. One year from your date of purchase, conditioned on storage and shelf life.
Equipment and Rig Limited Warranty
If you bought a gun, rig, packaged system, or part. One year from date of shipment, covering what Alchatek manufactures and the workmanship of Alchatek-built systems. Pumps, engines, generators, hoses, compressors, trailers, and other components Alchatek does not manufacture carry no Alchatek warranty. This warranty covers the original purchaser only and ends if the equipment is sold, leased, or rented on.
Warranty 1 of 2
Chemical and material products
Alchatek Form 9300. Applies to resins, catalysts, accelerators, coatings, adhesives, and other application-sensitive materials. Corresponds to Section 11.1 of Alchatek Form 9002 Customer Terms and Conditions.
Limited Express Warranty
Alchatek warrants to the end user who purchases this product that it will be free from manufacturer’s defects and will materially conform to the published properties on the Technical Data Sheet current at the date of shipment, for one (1) year from the end user’s date of purchase, provided the product is stored as stated under Storage and Shelf Life on the Technical Data Sheet, is installed or applied within the shelf life stated on the Technical Data Sheet measured from the date of manufacture, and is used in accordance with Alchatek’s published instructions and Safety Data Sheet. In no event does this warranty extend beyond thirty-six (36) months from the date of manufacture. The end user must provide dated proof of purchase; absent dated proof of purchase, the warranty period is measured from Alchatek’s date of shipment. This warranty runs only to the original end user, is not transferable, and creates no rights in any subsequent owner, occupant, contractor, lender, or other person.
Warranty Claims
The end user must notify Alchatek in writing within ten (10) days after discovering the alleged defect and within the warranty period, provide dated proof of purchase and the lot or batch number of the product at issue, preserve the product and its packaging, provide samples on request, stop further use where commercially reasonable, and give Alchatek a reasonable opportunity to inspect and test before any removal or remedial work. Failure to do so bars the claim.
Exclusive Remedy
Alchatek’s sole obligation and the end user’s exclusive remedy for any breach of this warranty is, at Alchatek’s option, replacement of the affected product or refund of the purchase price paid for it. This remedy excludes labor, removal, reinstallation, freight, storage, field service, third-party testing, and the cost of other materials.
No Other Warranties; Limitation of Liability
ALCHATEK MAKES NO OTHER WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, AND EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTY ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. ALCHATEK IS NOT LIABLE FOR INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES, INCLUDING LOST PROFITS, DELAY DAMAGES, WATER OR MOISTURE DAMAGE, DAMAGE TO OTHER PROPERTY, OR THIRD-PARTY CLAIMS AGAINST THE USER. ALCHATEK DOES NOT WARRANT FIELD PERFORMANCE, WATERTIGHTNESS, APPEARANCE, OR SUITABILITY FOR ANY PARTICULAR PROJECT. THE USER IS RESPONSIBLE FOR DETERMINING SUITABILITY FOR THE INTENDED USE AND ASSUMES ALL RISK.
Latest Information
Before each use, read the latest Technical Data Sheet, Safety Data Sheet, and instructions available at Alchatek.com. Nothing in any Alchatek material or verbal instruction relieves the user of the obligation to read and follow all instructions and warnings. All information Alchatek gives about its products and procedures is given in good faith based on current experience and knowledge, assuming materials are properly stored, handled, and applied. Jobsite conditions vary, and Alchatek assumes no liability for the provision of such information or assistance, and no legal relationship is created by it.
FOR INDUSTRIAL USE ONLY. KEEP OUT OF REACH OF CHILDREN. NOT FOR INTERNAL CONSUMPTION. READ THE SAFETY DATA SHEET PRIOR TO EVERY USE. Properties will vary depending on application conditions.
Governing Law
This warranty is governed by the laws of the State of Georgia, without regard to its conflict of laws provisions.
Warranty 2 of 2
Equipment and Rig Limited Warranty
Alchatek Form 9301. Applies to equipment, rigs, packaged systems, and replacement parts, including the Alchatek MixMaster gun. This is the standalone warranty referenced in Section 11.3 of Alchatek Form 9002 Customer Terms and Conditions, and it is the governing document for equipment. It does not cover chemical or material products, which are warranted above.
1. What Alchatek Warrants
Items Alchatek manufactures. Alchatek warrants to the original purchaser that, for one (1) year from the date of shipment, items Alchatek manufactures or fabricates, including the Alchatek MixMaster gun, will be free from material defects in material and workmanship and will materially conform to Alchatek’s written specifications in effect at shipment.
Alchatek-branded rigs and packaged systems. Alchatek warrants to the original purchaser that, for one (1) year from the date of shipment, the fabrication, assembly, plumbing, hose routing, wiring, mounting, and integration workmanship of any rig, skid, or packaged system sold under the Alchatek name will be free from material defects in workmanship, whether the system was assembled by Alchatek or by a contract builder on Alchatek’s behalf. This warranty covers system-level workmanship only.
2. What Alchatek Does Not Warrant
Pumps, hoses and hose assemblies, engines, gasoline and diesel generators, air compressors, air dryers, hose reels, trailers and chassis, and electrical, pneumatic, and hydraulic components are not manufactured by Alchatek and carry no Alchatek warranty of any kind, whether purchased separately, purchased as a replacement part, or incorporated into a rig, skid, or packaged system.
The sole warranty on any such component is the warranty, if any, of its own manufacturer, on that manufacturer’s terms and for that manufacturer’s period. Alchatek delivers the component manufacturer’s warranty documentation supplied with the component and will pass through or assign that warranty to the extent the manufacturer permits. Alchatek does not guarantee the duration or availability of any component manufacturer warranty and is not responsible for a component manufacturer’s performance, solvency, warranty terms, or denial of a claim.
Alchatek also does not warrant any failure of an Alchatek-branded system that is caused by a third-party component.
3. Who Is Covered
This warranty extends only to the original purchaser that acquired the equipment new from Alchatek or from an Alchatek-authorized reseller.
THIS WARRANTY IS NON-TRANSFERABLE. IT DOES NOT EXTEND TO ANY SUBSEQUENT PURCHASER, OWNER, LESSEE, RENTER, BORROWER, OR OTHER PERSON, AND IT TERMINATES AUTOMATICALLY UPON ANY SALE, TRANSFER, LEASE, RENTAL, OR ASSIGNMENT OF THE EQUIPMENT BY THE ORIGINAL PURCHASER. ALCHATEK HAS NO WARRANTY OBLIGATION TO ANY PERSON OTHER THAN THE ORIGINAL PURCHASER.
4. Component Registration and Component Claims
The original purchaser is responsible for registering third-party components with their manufacturers where registration is required to activate or preserve a warranty. Alchatek will provide make, model, serial number, and purchase date information on request. Component warranty claims go directly to the component manufacturer. Alchatek will cooperate reasonably in identifying the component and the correct manufacturer contact.
5. How to Make a Claim Under This Warranty
The original purchaser must notify Alchatek in writing within ten (10) days after discovering the alleged defect and within the warranty period, provide dated proof of purchase, preserve the item and any failed part, stop use where commercially reasonable, and allow Alchatek a reasonable opportunity to inspect and test before any repair, removal, or replacement. Failure to provide timely notice, proof of purchase, or an inspection opportunity bars the claim.
6. Exclusive Remedy
Alchatek’s sole obligation and the original purchaser’s exclusive remedy for any breach of this warranty is, at Alchatek’s option, repair, replacement, or refund of the purchase price allocable to the affected item. This remedy excludes labor, removal, reinstallation, freight, downtime, rental of substitute equipment, field service, and third-party testing.
7. Exclusions
This warranty does not apply to consumables, ordinary wear items, misuse, abuse, neglect, accident, improper maintenance, improper installation, unauthorized repair or modification, use of non-approved parts or fluids, operation contrary to instructions or outside rated capacity, or damage from causes outside Alchatek’s reasonable control.
8. No Other Warranties; Limitation of Liability
EXCEPT FOR THE LIMITED WARRANTY STATED ABOVE, ALCHATEK MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, AND EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTY ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. ALCHATEK MAKES NO WARRANTY WHATSOEVER ON COMPONENTS IT DOES NOT MANUFACTURE. ALCHATEK IS NOT LIABLE FOR INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES, INCLUDING LOST PROFITS, DELAY DAMAGES, DOWNTIME, LOSS OF USE, COST OF SUBSTITUTE EQUIPMENT, DAMAGE TO OTHER PROPERTY, OR THIRD-PARTY CLAIMS AGAINST THE PURCHASER.
9. Relationship to Alchatek Terms and Conditions
This warranty is the warranty referenced in Section 11.3 of Alchatek Form 9002 Customer Terms and Conditions, which governs every sale of equipment by Alchatek, including payment, delivery, risk of loss, limitation of liability, governing law, and mandatory binding arbitration. If this warranty and Form 9002 conflict, Form 9002 controls. No Alchatek employee, representative, dealer, or distributor has authority to modify or enlarge this warranty, and no statement, quotation, drawing, specification review, training, or field assistance creates any additional warranty.
10. Governing Law
This warranty is governed by the laws of the State of Georgia, without regard to its conflict of laws provisions. Section 9 continues to apply, and if this warranty and Alchatek Form 9002 Customer Terms and Conditions conflict, Form 9002 controls.
Both warranties last updated . Draft v0.3 releases Block A, Block B, the Equipment and Rig Limited Warranty, and Alchatek Form 9002 together; the four are revised as one set.
Filing a claim
How to submit a warranty claim
Written notice is required within ten days of discovering the alleged defect, and within the warranty period. What you need to include, and in one case who you send it to, depends on what the claim is about.
If the claim is about a material
Send notice to Alchatek with your dated proof of purchase and the lot or batch number from the product packaging. Keep the product and its packaging, provide samples on request, and stop further use where it is reasonable to do so, until Alchatek has had the opportunity to inspect and test. You do not need to decode the lot number: give it to Alchatek and we will confirm the date of manufacture and the expiration date.
If the claim is about Alchatek-manufactured equipment or Alchatek-built system workmanship
Send notice to Alchatek with your dated proof of purchase. Preserve the item and any failed part, stop use where it is reasonable to do so, and allow Alchatek to inspect and test before any repair, removal, or replacement.
If the claim is about a pump, engine, generator, hose, compressor, trailer, or other component
That claim goes to the component manufacturer, not to Alchatek. Those components carry no Alchatek warranty. Alchatek will help identify the component and the correct manufacturer contact, and can provide make, model, serial number, and purchase date on request. Registering components with their manufacturers, where registration is required to activate or preserve a warranty, is the purchaser's responsibility.
If you bought the equipment used, leased, or rented
The Alchatek equipment warranty does not apply. It covers the original purchaser who acquired the equipment new from Alchatek or an authorized reseller, and it ends automatically on any sale, transfer, lease, rental, or assignment. Component manufacturer warranties may still apply on their own terms, and Alchatek can help identify the component and the right manufacturer contact.
Send notice to Alchatek by email or by mail:
By email
Email is written notice. Attach your dated proof of purchase, and for a material claim include the lot or batch number from the packaging.
By mail
Alchatek, LLC
Attn: Warranty Claims
4508 Bibb Blvd, Suite B-5
Tucker, Georgia 30084
Related documents
Documents these warranties depend on
Both warranties are published in full above. This page is the current version of each, and no separate copy needs to be requested. What is not on this page is the product-specific detail each warranty is measured against: storage conditions, shelf life, published properties, written specifications, and handling instructions live on the documents for the specific product you purchased.
Technical Data Sheets and Safety Data Sheets
The full library across every product and system, used for submittal packages and side-by-side comparison. The Technical Data Sheet current at your date of shipment is the one this warranty conforms to.
Product pages
Each product page carries that product's own data sheets, safety data sheet, and installation procedures. Start here if you already know which product you are asking about.
Customer Terms and Conditions of Sale
Alchatek Form 9002 governs every sale, including payment, delivery, risk of loss, limitation of liability, governing law, and mandatory binding arbitration. Section 11.1 corresponds to the materials warranty and Section 11.3 to the Equipment and Rig Limited Warranty. Where Form 9002 and a warranty conflict, Form 9002 controls.
Where to go next
Questions about a product, not a claim?
If you are selecting a product, checking whether one fits a condition, or working through an application question, that is not a warranty matter. Technical Services can work it through with you, and the documentation is in Engineering Resources.