Start with what you're seeing
Concrete, Soil, and Water Problems: Start With the Condition You See
Seven conditions cover most of what Alchatek's systems repair. Each page explains what the symptom usually means, what is failing beneath it, and which repair method fits. Alchatek manufactures and supplies geotechnical and waterproofing materials and equipment. Installation is performed by trained contractors.
7 Conditions Diagnosed
Diagnosis Before Method
Trenchless · Minimal Excavation
Manufacturer of Record
In short
Which problems does Alchatek address?
Alchatek's systems address seven conditions: settled concrete slabs, voids beneath concrete, soil instability beneath structures, bridge approach settlement, soil erosion and washout, seawall soil erosion, and water intrusion. Each is a symptom of lost ground beneath a structure or uncontrolled water, and each routes to a specific repair method.
Choose your condition
Pick the one closest to what you can see.
You do not need to know the cause or the method. Match the symptom, open the page, and it explains what is usually happening underneath and which repair fits.
Settled Concrete Slabs
If a slab has dropped, tilted, or sits lower than the one beside it. The concrete is rarely the problem. The ground beneath it has changed, and that decides the repair.
Voids Beneath Concrete
If the slab looks fine but sounds hollow, or soil is washing out at an edge. A hidden cavity under the slab or pavement. The surface can look stable while the gap grows.
Soil Instability Beneath Structures
If a building, tank, or structure is settling or cracking and the ground itself is weak or still moving. Broader or deeper than a single slab: the soil is no longer dependable, so the structure keeps moving.
Bridge Approach Settlement
If there is a bump or drop where pavement meets a bridge deck. The ground under the approach has settled while the bridge has not. The bump is the symptom.
Soil Erosion & Washout
If water is carrying soil away from under a slab, edge, or embankment, often after storms or a leak. Moving water removes the fine soil a structure sits on. The settlement and cracking follow.
Seawall Soil Erosion
If there are sinkholes, depressions, or settlement behind a seawall or bulkhead. Backfill is escaping through joints and cracks in the wall. Left alone, the wall itself can move.
Water Intrusion & Water Entry
If water is coming through a crack, joint, or wall below grade, actively or as seepage. Where the water enters and how much pressure is behind it matters more than where the wall looks wet.
Not sure what you're seeing?
If the symptom does not match any card, or it is active, growing, or affecting safety. Describe what is happening on your site and Alchatek's technical team helps narrow the condition first.
Which repair fits which condition
Four repair methods cover all seven conditions.
Once the condition is clear, the method follows. Each problem page routes to the right one; the short version is below.
Concrete Leveling & Stabilization
For settled slabs, voids beneath concrete, and many bridge approaches. Lifts the concrete back to grade and stabilizes the ground beneath it so the correction holds.
Soil Stabilization & Settlement Control
For soil instability beneath structures and erosion-driven settlement. Strengthens weak or washed-out soil at its source.
Leak Sealing & Water Control
For water intrusion and water entry. Fills the crack or joint and seals the leak, with the pressure condition accounted for.
Seawall & Waterfront Stabilization
For seawall soil erosion. Fills voids and stabilizes the soil behind the wall from the land side, no excavation required.
Problems: Common Questions
Start with what you can see, not what you think is causing it. A dropped or tilted slab is Settled Concrete Slabs. A hollow sound or soil loss at an edge is Voids Beneath Concrete. A whole structure settling on weak ground is Soil Instability Beneath Structures. Water coming in is Water Intrusion. Each page then explains the cause and the repair.
A settled slab has dropped because the ground directly beneath it changed; the ground is often still solid once the slab is lifted and the gap filled. A void is a hidden cavity under a slab that may not have moved yet. Soil instability means the ground itself is weak or still moving, usually under a larger structure, so the soil has to be strengthened before anything above it stays put.
Not always, but some are. A condition that is stable and slow-moving can usually be scheduled. A condition that is active, growing between visits, or affecting a load-bearing structure, a roadway, a seawall, or public access deserves a project review now. If you are unsure which it is, request project assistance and describe what is changing.
Yes, and it is common. Water intrusion often causes the erosion that leads to voids and settlement, and a seawall can be losing soil while the deck behind it settles. The problem pages cross-reference each other for that reason, and a project review can confirm which conditions are present before a method is chosen.
Alchatek manufactures and supplies geotechnical and waterproofing materials and equipment. Installation is performed by trained contractors. If you are an owner or engineer who needs the work done, Alchatek can help connect you with a trained contractor. If you are a contractor or distributor, there are pages built specifically for you under Who We Serve.
The seven conditions cover most of what Alchatek's systems repair, but not every situation has its own page. If you have a slab, foundation, tank, below-grade structure, or waterfront wall with ground that is settling, washing out, or leaking, the same diagnose-then-repair logic usually applies. Request project assistance and describe what is happening.
Find your condition above, or skip ahead: tell us what is happening on your structure or site and get a repair direction matched to it.