Market · Agriculture, Food & Beverage

Keep your operation running:
in Agriculture, Food, or
Beverage, when the ground
beneath it starts to move.

From grain bins and silos to processing floors, freezer and cold storage, and underground hoppers, settlement, voids, and water intrusion can disrupt production long before they become obvious. Polyurethane injection systems stabilize the ground, lift and level settled slabs, and seal water, often while the facility stays in operation.

Grain bins & silos

Food & beverage plants

Freezer & cold storage

Repairs while operational

Bigger than the visible symptom

A fraction of an inch is rarely a
fraction-of-an-inch problem.

On storage that stands 60 to 120 feet tall, a small amount of tilt at the base is a serious event at the top. On a drying floor, a slab that has dropped a few inches spills product and starves the augers that move it. On a processing line, a floor that drifts out of tolerance can throw off the equipment mounted to it. And where water reaches stored grain or an underground pit, the real cost is contamination and downtime, not the crack you can see.

Concrete slab at a grain storage facility undermined by a washed-out void, with silos in the background

The visible crack, tilt, or wet spot is the symptom. What is failing below is usually weak subgrade, a void that has opened under the slab, or fines that have migrated out of the ground. Reaching the cause, not just the surface, is what keeps the repair from coming back.

Where this applies

If it stores, processes, or moves product,
the ground beneath it has to stay put.

These are the structures and conditions seen most across agriculture, food, and beverage sites.
Start with what you are seeing and follow it into the matching condition page.

Grain elevator and steel silos beside a warehouse and concrete yard at an agricultural facility

Not sure which condition
you are dealing with?

Describe what you are seeing on site and get a defensible repair
direction before the project moves further.

Stronger early decisions reduce disruption

Most of these operations can't afford to stop, and usually don't have to.

Production sites rarely have room in the schedule for a long shutdown. Because polyurethane injection is targeted and cures quickly, work can often be sequenced around live operations, so a settling floor or shifting pad can be addressed without emptying the building. Acting while the movement is small also keeps the repair small.

The cost of waiting

Left alone, voids and weak subgrade tend to spread, product loss and out-of-tolerance floors compound, and a condition that could be stabilized in place today can later require excavation or structural piers, a larger, more disruptive, and more expensive fix.

When the condition runs deeper than it looks

Surface leveling won't reach a
problem that lives several feet down.

When movement traces to weak subgrade or voids well below the slab, lifting the surface alone will not hold. Ground stabilization addresses what is failing below, and where storage and structures need support reached at depth, deep injection, Deep Lock®, carries the work down to it. Once the repair direction is clear, the right material and system are matched on the Systems & Products page.

Cutaway illustration of polyurethane injected beneath a grain bin slab to fill voids and stabilize the soil

Agriculture, Food & Beverage: common questions

Yes. When a tall grain bin or silo settles or tilts, polyurethane injection can stabilize the ground beneath it and, where slabs and pads have dropped, lift them back toward grade, often without taking the structure out of service. The deeper the movement, the more the work shifts from surface lifting to ground stabilization.

In many cases, yes. Polyurethane injection is targeted and fast-curing, so production often continues around the work. Whether a specific area can stay live depends on access, loading, and the condition itself, that is part of what a project review confirms.

Yes. Where cementitious flowable fill can freeze before it reaches the void, polyurethane systems remain workable in cold and freezer environments, which makes them a practical option for low-temperature storage where pours are difficult.

Yes. Curtain grouting and crack injection can cut off water entering underground hoppers, elevator pits, and crawlspaces, important where water and stored product cannot mix. Sealing is matched to where the water is actually coming from.

Not always. Slabs carrying racking and product have been lifted and leveled in place by injecting beneath the floor and raising it under load. Whether a floor qualifies depends on slab thickness, load, and the cause of the settlement.

Yes. Processing and production floors in food and beverage plants often hold tight tolerances, and settlement or voids beneath them can affect equipment and product. Lifting, leveling, and ground stabilization can correct floor elevation and the ground beneath production areas.

Movement rarely stops on its own. Voids and weak subgrade tend to spread, product loss and out-of-tolerance floors compound, and a condition that could be stabilized in place today may later require excavation or structural piers, a larger, costlier fix.

Start with the visible condition, a settling floor, a tilting silo, water where it shouldn't be, and request a project review. The condition and solution pages walk through what is likely failing below and which repair direction fits.

Proof & Verification

Named Project

Slab Lift at Seed Sorting Plant

A hidden broken water main sank a seed plant’s floors 7 inches. After mudjacking failed, AP Lift 440 restored them before harvest season began.

Case Study

Performance Data Point

900,000 pounds lifted in under a week.

Documentation Reference

Agriculture, food, and beverage sites can't stop for long, and with the right repair direction, they usually don't have to.
Tell us what's happening below your floors and storage, and get a defensible plan.