Leak Sealing & Water Control · Cartridge Injection Kit
INJECTR Series Polyurethane Injection Cartridges
Crack injection without the pump. Resin and accelerator ride in two sides of one caulk-gun cartridge and mix as you dispense, so a single leak does not need a crew and a rig.
ISO 9001 Certified · Facility-wide quality management certification.
Crack injection
Caulk gun compatible
No grout pump required
4-pack & 12-pack
On this page:
What it is
The same Spetec resins, in a cartridge instead of a drum
INJECTR Series cartridges are dual-chamber 10.5 oz polyurethane injection cartridges holding a Spetec leak seal resin and the GEN ACC accelerator side by side, dispensed from a standard caulk gun. Two resins are offered in the format, and only those two:
Spetec F400 for cracks and joints that move, and
Spetec HighFoamer for gushing leaks and voids.
The chemistry is not a lighter version of the pumped product. It is the same resin. What changes is the delivery, and with it the economics of the small job: no proportioner, no pump to flush, no second set of hands.
Where it is used
What INJECTR Series cartridges are used for
INJECTR Series cartridges sit in the Leak Sealing & Water Control solution family. The published applications follow the resin in the cartridge.
Concrete crack leaks, with Spetec F400
Pipe penetration leaks, with Spetec F400
Hairline cold joint leaks, with Spetec F400
Gushing leak control, with Spetec HighFoamer
Void fill in wet conditions, with Spetec HighFoamer
Service calls and single-crack repairs of any kind
Working across many cracks at once, or curtain grouting behind a wall? That is pump work. Start at Leak Sealing and Water Control and come back to cartridges for the one-off repairs.
How it works
How a cartridge replaces a grout pump on a small repair
Ports are drilled into the crack, the cartridge goes into a caulk gun, and resin and accelerator combine in the static mixer on the nose of the cartridge as they are dispensed through the port. The resin reacts with the water in the crack, expands, and fills the crack or joint through the structure rather than only at the face.
Keeping the two components apart until the mixer is what makes the format work. There is nothing to measure, nothing to weigh, and no pot life running down while the crew sets up. When the cartridge is spent, the mixer is thrown away instead of a pump being flushed.
Technical specifications
What is in the kit
Cartridge
Property | Value | Source / Note |
|---|---|---|
Format | Dual chamber, resin on one side and GEN ACC accelerator on the other, combining in a static mixer | Product page and flyer |
Cartridge size | 10.5 oz | Product page |
Resins offered | Spetec F400, Spetec HighFoamer | Product page and flyer |
Dispensing tool | Standard caulk gun | Product page and flyer |
Pack contents
Pack | Contents | Source / Note |
|---|---|---|
4-pack kit | 4 cartridges, 4 static mixers, 8 half-inch drill ports, 4 large push connects, 4 small push connects, and one 10 foot roll of flexible tubing | Flyer and product page |
12-pack case | Cartridges only; accessories are not listed with this pack | Product page |
Resin properties & certification
Property | Value | Source / Note |
|---|---|---|
Resin specifications | Published on each resin page: Spetec F400 and Spetec HighFoamer. Both resins are certified to NSF/ANSI/CAN 61 and 372 for contact with drinking water, with use restrictions; the certificate for each is on its resin page. | Not restated here, so there is one place to maintain each number |
The certifications listed above cover the resins. Coverage per cartridge is not published; ask Technical Services when sizing a job. Source: INJECTR Series product page and the 4-pack kit flyer, with resin data on the two resin pages. Properties vary with site conditions; confirm against the current data sheets before specifying.
Downloads
Kit flyer, data sheets, and certificates
INJECTR Series 4-Pack Flyer
Kit contents · PDF
Spetec F400 Data Sheet
Resin properties · PDF
Spetec F400 Safety Data Sheet
Handling and safety · PDF
Spetec HighFoamer Data Sheet
Resin properties · PDF
Spetec HighFoamer Safety Data Sheet
Handling and safety · PDF
Assembling a submittal package or comparing products? Every TDS, SDS, spec, and certificate lives in the central Downloads library.
Compatible equipment & accessories
What you need to use INJECTR Series cartridges
Standard caulk gun, the only dispensing tool required. No pump and no proportioner.
Rotary hammer or drill, for setting the ports. Supplied by the crew.
Half-inch drill ports, push connects and tubing, included in the 4-pack kit and sold separately for the 12-pack. View ports
Alchatek Oakum, an oil-free compressible fibrous packing, forced into a joint or opening to provide a backing or carrier for the resin. It has to be oil free, because oiled fiber will not absorb the resin. View oakum
Alchatek Pump Flush, for crews running cartridges alongside a pump on the same job. View flush
Related articles & guides
Learn the method behind the product
Save Time & Money with INJECTR Series Cartridges
Format explainer
Crack Injection with the Spetec F400 INJECTR Series Cartridge (Demo Video)
Field demonstration
Hydrophobic Polyurethanes vs Hydrophilic Polyurethanes
Chemistry comparison
Frequently Asked Questions
Crack injection in a caulk gun. Each 10.5 oz cartridge holds a Spetec leak seal resin and the GEN ACC accelerator in two sides of the same cartridge, so the two meet and mix as they are dispensed. The cartridge replaces the grout pump on jobs too small to justify one.
Those two only. F400 is the flexible hydrophobic resin for concrete crack leaks, pipe penetration leaks and hairline cold joint leaks. HighFoamer is the high-expansion semi-rigid resin for gushing leaks and void fill in wet conditions. No other Spetec resin is offered in the cartridge format.
A standard caulk gun. No proportioner and no grout pump. That is the whole point of the format.
Four cartridges, four static mixers, eight half-inch drill ports, four large push connects, four small push connects, and one 10 foot roll of flexible tubing. Everything except the drill and the caulk gun.
When the job is small enough that mobilizing a pump and a crew costs more than the repair. A single crack in a basement wall, a leaking pipe penetration, a service call. For production work across many cracks, or for curtain grouting, a pump is still the right tool.
Yes. The resin still has to be delivered into the crack under pressure rather than smeared across the face of it. The 4-pack kit ships with eight half-inch drill ports, push connects, and tubing for that reason.
In the static mixer on the nose of the cartridge. Resin and GEN ACC accelerator sit in separate sides of the cartridge and combine only as they pass through the mixer, so there is no pot life to manage and no measuring on site.
A 4-pack kit that includes the mixers, ports, connects and tubing, and a 12-pack cartridge case for crews that already have the accessories.
Choose by what the water is doing. F400 stays flexible and suits cracks and joints that move. HighFoamer expands far more and is the choice when water is gushing or there is a void behind the crack to fill. If both describe the job, call Technical Services rather than guessing.
Proof & Verification
One crack, one service call, and no reason to mobilize a rig? Talk the repair through and get the right resin in the cartridge the first time.
For documentation, see the data sheets above or reach Technical Services. To purchase, find an authorized distributor or a qualified contractor.