Equipment & Accessories
Polyurethane Injection Equipment and Accessories for Geotechnical and Leak Seal Work
The pumps, guns, rigs, hoses, packers, ports, and consumables that Alchatek's materials are built to run through, organized by discipline so you can match the setup to the work before you buy. Alchatek manufactures and supplies geotechnical and waterproofing materials and equipment. Installation is performed by trained contractors.
ISO 9001 certified manufacturer
Geotechnical · Leak Seal
Published specifications
Alchatek-built custom rigs
What it is
What equipment does Alchatek supply?
Two lines. Geotechnical: PMC two-component proportioners, injection guns, a skid system, soil testing instruments, custom-built rigs, and the heated hoses, ports, filters, and consumables they run with. Leak seal: Titan and Alchatek injection pumps, the SealMaster gun, and the packers, ports, valves, oakum, and consumables for crack injection.
Choose your line
Two disciplines, each with its equipment and the accessories that complete it.
Slab lifting and soil injection run two-component materials through proportioners and heated hose. Leak sealing runs single-component and gel resins through smaller pumps, packers, and ports. Start with the work you do.
Geotechnical: slab lifting and soil injection
If you lift slabs or inject soil with two-component polyurethane.
PMC PH-2 2000, PH-40, Premier, and Premier Mach 2 proportioners; PolyShark, MixMaster Pro, and PMC PX-7 guns; MiniMaster skid; Pagani DPM-30 and Deep Look® GPR soil testing; V-nose trailer and box truck rigs.
If you already run a proportioner and gun and need what they run with.
Heated main and whip hoses, Sidewinder hose wrap, tapered and concave ports, button head fittings, tubing injection assembly, A-side in-line filter, the Jack Attack System, and flushing and surface-protection consumables.
Leak seal: crack injection and water control
If you seal cracks, joints, and leaks below grade.
Titan Impact 440 and 640, Titan PowrTwin 8900 Plus, the Alchatek Acrylate Gel Pump, and the SealMaster adjustable flow injection gun, from a 35 pound electric pump up to a gas-powered unit for curtain grouting.
If you already run a crack injection pump and need to size the kit to the crack and the resin.
Mechanical packers in three sizes, 3/8 inch hammer-in and drive-in ports, high pressure crack injection and F-valves, flush wand, oakum, and five consumables for flushing, cleaning, protecting, and reinforcing.
Match the equipment to the material
The equipment is only half the setup. These pages complete it.
Every unit on the equipment pages is listed with the materials it is built to run. Use these to close the loop between product, pump, documentation, and help.
Systems & Products
Every Alchatek material grouped by the method it serves, so you match the condition first, the product second, and the pump third.
Data sheets & downloads
Technical data sheets, safety data sheets, specifications, and drawings for the materials each unit runs.
Equipment and Rig Limited Warranty
The warranty terms that apply to Alchatek-built rigs and Alchatek-made parts, alongside the chemical product warranty.
Technical Services
Help choosing a unit, matching it to the material and the power on site, or troubleshooting one you already own. Call 404-850-6988.
Equipment & Accessories: common questions
Slab lifting and soil injection use two-component polyurethane, so they need a proportioner (PMC PH-2 2000, PH-40, Premier, or Premier Mach 2), heated hose, and a gun such as the PolyShark or MixMaster Pro. Leak sealing uses single-component and gel resins, so it needs a smaller injection pump (Titan Impact 440 or 640, PowrTwin 8900 Plus, or the Acrylate Gel Pump) with packers or ports. The two lines are not interchangeable.
Ports and fittings on the geotechnical side are matched to specific guns, and the accessories page says which. Leak seal packers and ports are sized to the crack and the resin rather than to a brand of pump. If you are unsure, Technical Services can confirm fit before you order.
Yes. Alchatek builds custom rigs on two platforms, a V-nose trailer and a box truck build-out, around the proportioner, hose, and power the work calls for. The Geotechnical Equipment page covers both, with the specifications published.
Alchatek-built rigs and Alchatek-made parts are covered under the Equipment and Rig Limited Warranty. Stock units from other manufacturers, such as Titan pumps, carry their own factory warranty. Read the warranty page for the terms that apply before you buy.
On the equipment pages themselves. Each unit is listed with its published specifications and the materials it is built to run, so you can match the machine to the material, the power on site, and the size of the work. Material data sheets are in Downloads.
Yes. Technical Services helps match a unit to the material, the power available on site, and the volume of work, and troubleshoots equipment you already own. Call 404-850-6988 or request project assistance for a larger job.
Choose your line above, or skip ahead: tell us the work you do and the materials you run, and get a setup matched to both.