Back to Case Studies

US 98 Stormwater Pipe Repair Florida

Project photo: Preventing Undermining: US-98 Stormwater Repair
Alchatek
Case StudyLeak Seal
US Highway 98 stormwater system Florida

Preventing Undermining:
US-98 Stormwater Repair

US Highway 98 is the main coastal route along Florida's panhandle, connecting Panama City Beach, Destin, and Fort Walton Beach.

treated along a three-mile stretch of US 98
2,000pipe joints
Product
Spetec H100
Download as PDF
I · The Problem
Case Study  ·  01
01

What made this job
difficult.

US Highway 98 stormwater system
Florida

Groundwater infiltrating the stormwater system carried exceptionally fine sugar sand into pipes and manholes, gradually reducing capacity and causing flooding on roadways during heavy rains. The situation escalated when a vehicle was damaged after falling into a void created by soil loss beneath the roadway, highlighting the urgent need for a lasting solution.

Key Condition
Groundwater was entering through pipe joints, manhole connections, and cracks in concrete structures, transporting fine sand and creating sizable voids beneath the infrastructure. Voids were estimated to range from several inches to several feet around key structures.
The Constraint
3miles
stretch of highway affected
II · The Solution
Case Study  ·  02
02

What was specified,
and how it went in.

Spetec H100

Alchatek recommended Spetec H100, a semi-rigid polyurethane grout, for comprehensive rehabilitation. The approach involved direct injection into leaking joints and cracks, followed by creating a curtain wall around critical structures to prevent further sand migration and stabilize the surrounding soils. FDOT required a five-year warranty on the repair, underscoring both the severity of the problem and their confidence in the solution.

The Material
Spetec H100
Spetec H100
A semi-rigid polyurethane grout that expands to fill voids while remaining flexible enough to accommodate minor ground movement and maintain a watertight seal.
The Method
01
Drilled
Technicians drilled directly into each pipe joint, installing injection ports for precise placement of H100 grout.
02
Encapsulated
Additional holes were drilled about one foot from each joint in a clock pattern to encapsulate the joints and stabilize the surrounding soil.
03
Injected
Injection began at the lowest point of each structure and progressed upward to ensure complete filling and displacement of water.
04
Sealed
Manholes received perimeter injections to form a waterproof curtain wall, with special attention to all pipe penetrations.
Five-Year Warranty
FDOT required a five-year warranty on the repair.
A requirement that underscored both the severity of the problem and FDOT's confidence in the solution.
The Trigger
A vehicle was damaged after falling into a void created by soil loss beneath the roadway.
III · The Proof
Case Study  ·  03
03

What the result was,
and what confirmed it.

estimated replacement costs avoided
2017

Over the course of 18 months, approximately 2,000 pipe joints and numerous manholes were treated along a three-mile stretch of US 98. Since the project's completion in 2017, there have been no warranty claims or reported issues, even during multiple heavy storm seasons. The highway has remained free of flooding and sand accumulation, and no further undermining of the roadbed has occurred.

estimated replacement costs avoided
$7 million to $16.5 million
By choosing polyurethane injection over full excavation, the FDOT avoided these estimated replacement costs while keeping the highway open and safe throughout the process.
At a Glance
36 to 84inches
pipe diameter range
3miles
highway stretch treated
18months
project duration
2,000pipe joints
treated
Since 2017
No warranty claims or reported issues, even during multiple heavy storm seasons.
Start the Conversation
Send us the job.
We will send back an approach.

Send us the soil report or the failure photos and Technical Services will return a written approach within two business days.

Alchatek manufactures polyurethane resins, chemical grouts, and injection equipment for infrastructure repair: leak sealing, soil stabilization, concrete lifting, and seawall repair. Headquarters in Tucker, Georgia, with a bonded warehouse in Reno, Nevada.