Back to Case Studies

Concrete Tank Hairline Crack Injection

Project photo: Sealing Hairline Concrete Cracks
Alchatek
Case StudyLeak Seal
concrete tank Rollinsville, Colorado

Sealing Hairline
Concrete Cracks

Sealing Hairline Concrete Cracks with Acrylic Injection Resin

Elastic cure of Spetec AG200
500%elongation
Product
Spetec AG200
Download as PDF
I · The Problem
Case Study  ·  01
01

What made this job
difficult.

concrete tank
Rollinsville, Colorado

A concrete tank west of Rollinsville, Colorado began showing numerous, hairline cracks during construction. Previous attempts to seal the cracks using urethane grouts were unsuccessful due to the sheer tightness of the cracks and high amount of reinforcing steel. The tank was critical for a state infrastructure project, so a leak seal contractor was called in to get the job done.

Key Condition
Hairline cracks too tight for urethane grouts, with a high amount of reinforcing steel.
The Constraint
Hairline cracks
Urethane grout had already failed
The cracks were too tight for urethane grouts to penetrate, heavy reinforcing steel crowded the walls, and the tank was critical to a state infrastructure project.
At a Glance
500%
Elongation when cured
6cps
Mixed viscosity at 68°F
9 s–7 min
Pot life at 68°F
41–104°F
Processing temperature (substrate)
5–40°C
II · The Solution
Case Study  ·  02
02

What was specified,
and how it went in.

Spetec AG200

After a phone consultation with an Alchatek tech consultant, the contractor determined the best course of action would be to use Spetec AG200, a super-thin acrylate grout that could penetrate the hairline cracks and even the ones previously injected with a urethane grout. This water-swelling hydrogel is based on low-viscous acrylic that cures into an elastic product with 500% elongation.

The Material
Spetec AG200
Spetec AG200
Water-swelling hydrogel based on low-viscous acrylic that cures into an elastic product with 500% elongation.
The Method
01
Consult
Contractor consulted an Alchatek tech consultant by phone to determine the best course of action.
02
Train
The tech consultant trained a knowledgeable polyurethane grout crew how to handle Spetec AG200 and an acrylic pump.
03
Inject
The grout was injected into the hairline cracks.
III · The Proof
Case Study  ·  03
03

What the result was,
and what confirmed it.

The Outcome

After the grout was injected, the cracks sealed quickly. Both the customer and contractor were extremely happy with the results.

The Outcome
No chemical grout manufacturer other than Alchatek was willing to come out and provide field service for this application.
Start the Conversation
Send us the job.
We will send back an approach.

Send us the soil report or the failure photos and Technical Services will return a written approach within two business days.

Alchatek manufactures polyurethane resins, chemical grouts, and injection equipment for infrastructure repair: leak sealing, soil stabilization, concrete lifting, and seawall repair. Headquarters in Tucker, Georgia, with a bonded warehouse in Reno, Nevada.