Back to Case Studies

Aluminum Plant Quenching Tank Leak Repair

Project photo: Contractor Seals Leaks in Quenching Tanks for Aluminum Manufacturer
Alchatek
Case StudyLeak Seal
quenching tanks

Contractor Seals Leaks in Quenching Tanks
for Aluminum Manufacturer

A large Mid-Western aluminum manufacturer was losing water from all of its quenching tanks and turned to a trusted maintenance contractor, who came to Alchatek for guidance on how to efficiently mitigate the leaks with minimal downtime.

water lost in half a year
3 milliongallons
Product
Spetec F400
Download as PDF
I · The Problem
Case Study  ·  01
01

What made this job
difficult.

quenching tanks

A large Mid-Western aluminum manufacturer was losing water from all of its quenching tanks. Losing 3 million gallons in half a year can be expensive, not to mention the massive effect that volume of water can have on soil and the structures it supports.

The Ask
Mitigate the leaks efficiently, with minimal downtime.
The Constraint
3 milliongallons
lost in half a year
At a Glance
±340cps
Viscosity at 77ºF (25°C)
ASTM D4878-98
>302°F
Flash Point
ASTM D1310-86
290psi
Tensile Strength
ASTM D3574-03
±100%
Elongation at break
II · The Solution
Case Study  ·  02
02

What was specified,
and how it went in.

Spetec F400

After consulting with Alchatek, the contractor injected Spetec F400 to seal the leaking cracks.

Distributor Support
The contractor purchased the Spetec F400 from an Alchatek Leak Seal distributor, with Alchatek Technical Services supporting the job.
The Material
Spetec F400
Spetec F400
Solvent and phthalate-free, water-reactive, hydrophobic, closed-cell, low viscosity, shrink-free, flexible, one-component polyurethane injection resin designed to shut off water leaks.
The Method
01
Drill
the injection holes.
02
Flush
debris out of the holes with water.
03
Install
the injection port.
04
Flush
the crack with water.
III · The Proof
Case Study  ·  03
03

What the result was,
and what confirmed it.

The Outcome

The crew repaired leaks in one tank at a time with no manufacturing delays. This meant no production interruption. The work was done at a fraction of the cost of replacing the tanks.

One Job, Three Wins
The Manufacturer
No production interruption, completed at a fraction of the cost of replacing the tanks.
The Contractor
Technical guidance from Alchatek to seal the leaks efficiently, with minimal downtime.
The Distributor
A material sale to the contractor, backed by Alchatek technical support.
Start the Conversation
Send us the job.
We will send back an approach.

Send us the soil report or the failure photos and Technical Services will return a written approach within two business days.

Alchatek manufactures polyurethane resins, chemical grouts, and injection equipment for infrastructure repair: leak sealing, soil stabilization, concrete lifting, and seawall repair. Headquarters in Tucker, Georgia, with a bonded warehouse in Reno, Nevada.