What is a Mechanical Packer?
The term “mechanical packer” may not mean much outside the concrete repair industry. For anyone close to chemical grouting, though, it brings both form and function to mind. Packers are sometimes loosely called ports, but the two are not the same. A packer seals inside a drilled hole. A surface port mounts on the face of the substrate.
How Mechanical Packers Work
Mechanical packers are built to withstand high-pressure injection. They are inserted into pre-drilled holes in concrete, most commonly 5/16" to 5/8" in diameter.
Design: A rubber base on a threaded shaft.
Seal: Tightening the shaft compresses the rubber, creating a compression seal against the drill hole walls.
Pressure tolerance: Depends on how far the rubber is expanded and how much rubber surface contacts the drill hole. A smaller-diameter packer has less rubber against the concrete, so it holds less pressure when connected to high-pressure equipment.
Common sizes: Most job site and substrate conditions allow successful injection with a 3/8" to 1/2" packer, though some contractors prefer smaller or larger sizes.
Safety note: At very high injection pressures, a packer can leave the drill hole at dangerous velocity. Always ramp injection pressure up gradually rather than applying it all at once.
Packer Materials
Suppliers market packers in several materials:
Steel: The most versatile choice. Steel offers strength and resists the oxidizing components found in some chemical grouts, such as acrylics, so it is compatible with all chemical grout types.
Brass, aluminum, and zinc: These softer metals can show signs of deterioration when used with oxidizing grouts. Some contractors report the breakdown is slower than suppliers suggest and use these packers in those applications anyway.
Ball Valve Location
Every mechanical packer has an anti-return ball valve. Under pressure, the valve opens and lets chemical grout pass. When pressure is released, the valve closes and keeps resin from flowing back out of the drill hole.
The valve can sit in one of three places, each with tradeoffs:
Top-mount: Allows port-to-port travel observation during injection. The standard valve can also be swapped for a button-top fitting for a more secure, lower-leak coupler connection.
Bottom-mount (in the base): Lets the applicator remove the top shaft right after injection and patch the hole with the valve still in place. These tend to leave more excess grout in the shaft.
Free-floating in the shaft: Maximizes flow for high-volume applications.
Plastic Packers and Surface Ports
Not every injection point requires a threaded metal packer:
Hammer-in ports: Plastic packers with no threaded shaft. As they are driven into the drill hole, the tapered edges lodge against the sides and create the same compression seal. Pressure tolerance is typically lower than a mechanical packer.
Plastic button-top packers: Typically 5/8", with a pre-placed sleeve and a free-floating ball valve that maximizes flow for high-volume, plural-component foam applications.
Surface-mounted ports: Plastic ports bonded to the face of the substrate. These are common in epoxy injection, or wherever drilling would be harmful or ill-advised.
Alchatek’s Mechanical Packers and Ports
Alchatek supplies steel, top-mount mechanical packers in two diameters:
1/2" steel packer
5/8" steel packer
5/8" heavy-duty steel packer: A softer rubber grade and a top washer add grip in the drill hole when tightened.
Each of these packers can be converted to a button-top style with Alchatek’s button-top fittings for a more secure, lower-leak coupler connection.
For applications where a plastic hammer-in port is the better fit, Alchatek also supplies:
3/8" plastic hammer-in port with zerk valves
3/8" plastic hammer-in port without zerk valves
Get a Recommendation
For help selecting the right packer or port for your project, contact an Alchatek representative at 404-618-0438. Alchatek supplies steel mechanical packers in 1/2" and 5/8" diameters, including a heavy-duty option, 3/8" plastic hammer-in ports, and the chemical grouts and pumping systems needed to complete your next chemical grouting job.