Back to Blog

Specifications for Polyurethane Injection Grouting with Hydrophilic and Hydrophobic Materials

In this post, we're taking a closer look at our specification "Injection Grouting, Hydrophilic & Hydrophobic." The specification includes documentation on the following:

  • Sealing cracks in concrete structures through pressure injection

  • Sealing hairline cracks, expansion joints, wide cracks, pipe joints, and pipe penetrations

  • Saturating dry oakum to create a flexible gasket for sealing pipe penetrations, joints, and larger defects in concrete structures

Before we get into installation, it helps to understand the two resin types the specification covers. The difference between hydrophobic and hydrophilic polyurethanes comes down to how each behaves in the presence of water.

Hydrophobic polyurethanes, such as the Spetec F400, naturally repel water (similar to the way oil would repel water and stay separate if you were trying to mix them in a glass). These products push water out of the area in question as they expand. Hydrophobics are used with catalysts, which allow you to adjust the set time, and they have zero shrinkage after curing. Spetec F400 is a flexible polyurethane, so the seal moves with the structure instead of cracking apart.

Hydrophilic polyurethanes, such as the Spetec GT500, naturally mix with water before curing (similar to the way gin and tonic mix thoroughly in a glass). This characteristic allows for a very strong chemical and mechanical bond, as water helps pull the material into the pores of the concrete. These products do not require a catalyst; you can pump them straight out of the pail. Like its hydrophobic counterpart, Spetec GT500 is a flexible polyurethane.

Click this link, Injection Grouting – Hydrophilic and Hydrophobic, to view a PDF of the specification. It thoroughly documents the installation process for these two types of products (in our case, the hydrophilic Spetec GT500 and the hydrophobic Spetec F400). These are both flexible polyurethanes. For a copy of the specification in Microsoft Word format, please call Alchatek at 404-618-0438.

Title graphic: Specifications for Polyurethane Injection Grouting with Hydrophilic & Hydrophobic Materials

Want more information on crack injection with polyurethane?