Back to Blog

Lifting Foam Density and Expansion

Today I'd like to discuss a little "foam 101" info that addresses some commonly asked questions I get from slab lifting customers:

Density and Expansion

The most common slab lifting foams we sell are AP Lift 430, AP Lift 440, and AP Lift 475. Each foam has a different density and load-bearing capacity. They also have different expansion properties. The higher the density of foam, the lower the amount of expansion (yield). All of the properties on the datasheets are based on lab conditions and free rise foam compression and density testing. Free rise means foam that is allowed to expand in an unconfined state. When foam expands in a confined space, the densities and strengths increase rapidly.

Technical Data for Each AP Lift Foam

AP Lift 430

Expansion = up to 25x

Density = 3 lb per cubic ft

NSF/ANSI/CAN 61 Certified (Certified for contact with drinking water.)

Applications: Void fill, Residential Slabs, Light Commercial, some DOT

AP Lift 440

Expansion = 18x

Density = 4 lb per cubic ft

Applications: Commercial / Industrial Slabs, Bridge Approaches, DOT

AP Lift 475

Expansion = 15x

Density = 4.75 lb per cubic ft

NSF/ANSI/CAN 61 Certified (Certified for contact with drinking water.)

Applications: Industrial, Airport, Rail, DOT, Supplemental Sinkhole Remediation, Infrastructure Sealing

Blog graphic with a Questions/Answers sign and expanded lifting foam beneath a slab, about foam density and expansion

Want more info on Alchatek slab lifting products & services?