Back to Blog

Infrastructure Leak Seal and Void Fill

How Infiltration Undermines Sewer and Stormwater Structures

Aging sewer and storm water systems across the country are plagued by infiltration and inflow; especially in areas with high water tables and sandy soils. Over time, compacted soils around catch basins, manholes, and culverts relax and result in deflection of joints and pipe connections. The end result is infiltration of ground water into the storm and waste water systems. This infiltration erodes the soils surrounding below grade drainage structures resulting in sinkholes, settling roadways, and property damage; not to mention the extra cost of treating that uninvited ground water.

Sealing Leaks and Stabilizing Soils with AP Fill 700

The solution is a combination of sealing leaking joints both from within the drainage structures and through point grouting from street level. Expansive polyurethanes such as AP Fill 700 produced by Alchatek can be injected directly into pipe and manhole connections where they react with infiltrating water and expand to seal off leaking joints. Additional point grouting from street level fills voids and permeates loose soils. This relieves hydrostatic pressure from the structures and strengthens the ground to support the above roadways and sidewalks.

Direct Injection for Accessible Structures

For below grade structures that a man can safely enter, direct polyurethane injection is the best option.

Point Grouting When Interior Access Is Limited

If interior access is limited, point grouting technique can be implemented. This involved driving pipes into the vicinity of the active leaks on the outside of the structures and injecting AP Fill 700.

Talk to Our Technical Team

If you would like to discuss this product or these procedures, please call us at 404-618-0438.

Before-and-after cutaway of a manhole in leaking soil, then sealed with polyurethane grout filling surrounding voids

Want more info on infrastructure leak seal and void fill?