Back to Blog

Filling Abandoned Pipes with Spetec H100

I was recently contacted by an engineer in New England who requested a demo with one of our products. Specifically, he wanted to test Spetec H100 for filling abandoned pipes. In this case, we tested the material on a 6-inch diameter PVC pipe (but any type of abandoned pipe can be filled with expansive polyurethane as long as it's 30 inches in diameter or less). This pipe was 10 feet long, but there is no real length limit using the technique I describe in this blog post.

First, we plugged both ends of the pipe. We drilled a hole in the top middle of the pipe and inserted a port. We then injected the Spetec H100. For longer pipes, you would place a port every 3 feet or so. You'll also want to drill one 3/8" vent hole per 10 feet of pipe, in between ports. Of course, most abandoned pipes are located underground, so your crew will have to dig down to expose top of the pipe.

If you have abandoned pipes on a site you need to deal with, this is a simple, permanent method worth keeping in your back pocket. Every job is a little different, so if you want help scoping the work or picking the right material, reach out to our tech support team. Call 404-618-0438 and we will get you pointed in the right direction.

Blog graphic of abandoned pipe sections fully filled with Spetec H100 foam, titled Filling Abandoned Pipes

Want more information on using expansive polyurethane in underground structures?