Back to Blog

An In-Depth Look at Polyurethane Seawall Repair

The Problem

Seawalls usually fail because water moves through them. As the tide comes in, water pushes through cracks, joints, and weak spots in the wall. As the tide goes out, that water flows back out and takes sand and soil with it.

Over time, this soil loss:

  • Undermines the seawall

  • Creates empty spaces (voids) behind the wall

  • Weakens the structure

Heavy rain makes the problem worse because it keeps washing soil out through the wall.

The Evidence

Soil loss behind a seawall is often easy to spot in landscaped areas. Look for:

  • Small sinkholes near the seawall

  • Hidden sinkholes under grass, shrubs, or other plants. Some grasses spread over the top of a hole and hide it, so check closely.

  • Cracks in concrete slabs near the wall

  • Sand piling up at the base of the wall on the water side, if you can see that area

If you are still unsure, use a soil probe to check how firm the soil is near the seawall.

Seawall Repair Options

There are three main ways to repair a seawall.

Excavation

This means tearing out all or part of the wall and building a new one. The downsides are significant. Excavation is:

  • Costly

  • Time consuming

  • Environmentally damaging

  • Dependent on permits that take time to get

A new seawall will almost always cost more than a repair. Rebuilding takes time, creates a mess, and much of that mess can end up in the water. The permit process alone can cause long delays.

Cement Grout

Some contractors and property owners still use cement grout to fill sinkholes and plug seawall leaks. This is an outdated method with several drawbacks. Cement grout is:

  • Heavy on materials, labor, and machinery

  • Time consuming

  • Likely to break down over time

  • Heavy, which adds weight to a seawall or bulkhead that is already under stress

All that material and equipment can leave a big mess on the property, and the job takes longer than a typical polyurethane repair. Cement grout can also shrink and break down. That means a costly repair could wash out within weeks. Grout that stays in place adds weight and can cause the structure to sink over time.

Polyurethane Resin

Polyurethane seawall repair is the “Next Generation” method. It solves many of the problems that come with excavation and cement grout. Polyurethane repair is:

  • Efficient, with little disruption from equipment, labor, or messy materials

  • Fast, so the area can be used again quickly

  • Environmentally friendly

A polyurethane repair crew works quietly and cleanly. The equipment and process are non-invasive, so property owners can often keep using the area during the repair. Activity on and around the structure can typically resume within hours.

Most Alchatek polyurethane products are NSF certified. That means they have been tested for contact with recreational and commercial waterways and even with drinking water, so you can be confident they are safe for the environment.

Alchatek’s most widely used polyurethane seawall repair product is AP Fill 700, which contractors have used to solve serious seawall problems, including at an upscale marina.

An In-Depth Look at Polyurethane Seawall Repair: illustrations of a seawall before, during and after resin injection

Want more information on seawall repair with polyurethane?